The Soybean Saga – Part 2 – Almost All We Need to Know about Tofu + Silken tofu + Tau Fu Fa/Tàu Hũ Soy curstard Dessert – An All-in-one Master Recipe (2024)

Cooking Diary – Log 8 – 27.05.2012

In Part 1 of the Soybean Saga, I have showed you how to make your own pure, fresh, preservative-free, yummy soy milk. Now let’s turn this gorgeous into a beauty queen, tofu. Tofu is basically soy milk that has been coagulated with the appropriate addition of a harmless chemical.

Tofu is extremely low in calories, saturated fats, and carbohydrates, is free of cholesterol and is an economical source of protein in a vegetarian diet. It is very quick to prepare and easy to use. It is natural, inexpensive and can offer a simple solution for the world’s critical food requirements. 🙂 I am not exaggerating one bit.

Usually, most part of the soy milk I made is being turned into tofu, just a glass or 2 left for drinking. If there is one thing I love more than drinking my nutty, flavorful soy milk warm straight from the pot, it should definitely be the creamy, beany, freshly made silken tofu with a dash of soy sauce. Some complain that tofu is totally flavorless. I agree, totally. Yes, it is bland, but that is its unique beauty. Can you find other ingredients that can be as versatile as tofu? Because of its blandness, it absorbs, blends in, and complements very, very well others ingredients’ tastes. Some are born with a golden shiny hair like a sun. Some are born as hazelnut brunette. Of course the shiny things catch people attentions immediately, but think again, aren’t they both as beautiful?

In this post, I will describe the way of making tofu in my kitchen, plus almost all you need to know about homemade tofu. 3 best things about my method would be:

1) It is easy to follow with detailed instruction and pictures at every step, as in every post in my blog. I have tested making tofu with many different methods without many successes. This is the most sure-fire one in my kitchen.

2) Firstly out of this method, you can have silken tofu to enjoy, either as Kinugoshi (Japanese for silken tofu) with a dash of bonito flakes, soy sauce or ponzu sauce, freshly grated ginger, finely chopped cucumber, chopped scallion as a savory dish; or as sweet dessert like Tau Fu Fa (Chinese for soymilk custard in ginger syrup sauce) and Tàu Hũ (Vietnamese for the same thing).

3) Secondly out of this method, you can enjoy normal and firm tofu as sold in the supermarket, but with premium quality, if you follow with next steps. The control is totally in your hands.

Excited yet? 🙂 Once you have your soy milk cooked and still boiling hot, you are about 10 minutes from making hot, delicious and organic tofu. I know that the following will be very long to absorb, but I did try my best to make everything as clear as possible, so keep up with me, will you? 🙂

——————————————-

Ingredients

(Make 2 liters silken tofu – 800g soft tofu – 500g firm tofu)

• 2 liters of fresh soymilk made from the recipe here (Caution: store-bought soymilk won’t do!)
• 3g Gypsum – 2.8 g to be very precise in case you have a super scale. If you are a perfect little “freak” like me or you want perfect silken tofu, you will want to subtract a tiny bit of a water drop size out of the total 3g in order to achieve 2.8 g of gypsum, like this size.

• Don’t underestimate the 0.2g of gypsum, it will cause a huge difference in your tofu texture, for instance, use 0.2g more of gypsum will almost reach the setting limit of silken tofu, make it more fragile and easy to be broken down. (see Notes below for more information about tofu coagulants)

Recommended Utensils

• 1 pots of 4-liter capacity
• 1 pots of 3-liter capacity
• A heatproof spatula
• A 50x50cm very fine and strong cheese cloth, or cotton muslin, or other porous fabric
• A tofu mold (mine is a 22x11x5cm wooden mold, see note below to make yours)
• Heavy-weighed objects such as books, rocks (Mine is a 7kg homemade wine container)
• Optional – A thermometer (because tofu best coagulated at 85 degree Celsius, in case you want to check)

——————————————-

Some Notes before starting

Note on making Tofu

1) Here is a little warning about tofu homemaking that I think you should aware of before proceeding. For some reasons, maybe it is the uncertainties in the home kitchen environment and the lack of quality measurement and management, (wow, I am talking big, baby! LOL) My tofu has come out a bit different from each other from time to time. Sometimes the tofu was a bit too firm and lost some of its volume, other times it was soft and watery. Sometimes it was a bit grainier. Sometimes the curds were smooth and creamy. Some other times, unfortunately, the tofu didn’t seem to stick together, like at all.

It is, of course, sounds very risky, but whatever the outcome turned out, I always eat them all up because they are so delicious. So, don’t be afraid of giving homemade tofu a try. It will still totally be worth it, one way or another, and with some practices and experiments, may we find the golden rule for our own kitchens.

2) Making Tofu requires strength, carefulness, speed, patience, and passion. Strength to pick up a big pot of soy milk and do all the pouring and pressing work. Carefulness to not burn yourself into process of handling boiling hot milk or tofu. Speed to process the tofu as fast as possible. Patience to wait for the silken tofu to set without peaking for 20 minutes; to wait for water to be pressed out of the tofu mold. And passion to try again if couple of first times does not turn out right. Do you have all the qualities? 🙂

——————————————-

Note on coagulants

Time to get scientific! There are a lot of different coagulants for making tofu. Among them, the 5 main sources that usually use at home making level are:

1) Gypsum – (calcium sulfate) this is the tofu coagulant that is commonly used in China and Vietnam (currently). Use the food-grade gypsum, not the kind used in construction business or as cooling medicine in Chinese Oriental Pharmacies. 🙂 It is calcium rich, naturally occurring mineral that coagulates soy milk for tofu, plus, adding more calcium to your diet. Gypsum may be found at the Chinese grocery stores in your areas.

I must say that making tofu out of this coagulant, quite easy. But when it comes to silken tofu, Gypsum has a quite narrow window of success. Too little and the soybean milk just remains a thick, slurry milkshake. Too much and the soy milk curdles immediately and your only choice is to drain the water and press it in a mold to make normal tofu. So it is fatally important that you measure your beans and coagulant very, very precisely. I highly recommend using weight measurement rather than using teaspoon or cup. One tofu expert have taught me their ratio, 1 kg good dried soy bean : 17g Gypsum. And that’s what I share with you guys today. 🙂

Some claim that consuming Gypsum will cause kidney stones. I afraid I have to break this myth once and for all. 🙂 Everyday, we adult (age 19 to 50) need about 1000mg intake of calcium. Infants and toddlers need less, around 200mg to 700mg while children, teenagers and seniors need more, around 1200-1300mg. Each liter of silken tofu (approximately 4 cups) or 250g of extra firm tofu or 450g of medium tofu made by gypsum contain around 1000mg (1g) of calcium. It means we have to consume each of all these above, in order to reach out body need for the whole day, not to mention triple, even quadruple or more of that, for a long, long time like each and every day for many years in order to have those funky jewels in your kidneys. So, small chance it is, isn’t it? No more unreasonable fear, OK?

2) Epsom Salt – (magnesium sulfate) is recommended for first time tofu makers since they are cheap and very available in the USA, Canada and Europe, at most drug stores. More importantly, the magnesium based coagulants are easier to use because it has power to cause the separation of soy milk into curds and whey to happen more quickly, and more definitively than with a calcium based coagulant.

For this recipe, if you wish to use Epsom Salt, exchange 3g of Gypsum by 1tsp. Epsom Salt, diluted in 2 tbsp. of hot water or cool soy milk.

3) Nigari – (magnesium chloride) is the tofu coagulant that is most commonly used in Japan. However, the nigari sold as a health supplement (which recently claimed to have weight loss effect) doesn’t seem to have the same coagulating power as the nigari sold specifically for making tofu. So to make tofu, buy nigari from tofu and soy milk making oriented sources.

For this recipe, if you wish to use Nigari, exchange 3g of Gypsum by 1 tsp. of Nigari, diluted in 2 tbsp. of hot water or cool soy milk.

4) Lemon juice or vinegar – the acid will also coagulate the tofu. The final products made with lemon juice or vinegar will yield a bit of sour, interesting taste. In the past, Vietnamese tofu manufacturers used a mixture to coagulating tofu, not pure lemon juice or vinegar, but the sour whey extracted from the previous batches. You did not get it, do you? Me too. Sometimes I lost it. OK, let me try again.

How to make the tradition Vietnamese “sour water” for tofu? Firstly, they will do a batch of tofu by pure vinegar or lemon juice. After coagulating soymilk, they will have a clear soy curds and soy whey – yellowish water that have milder but still sour taste. This soy whey will be the coagulant for this next batch of tofu. How’s that now? Using “sour water” claims to result in more flavorful and tender, and richer tofu, but less in volume comparing with other coagulants, meaning less economic. Therefore, less and less manufacturers in Vietnam use “sour water” to make tofu, they change to gypsum. 😦

For this recipe, if you wish to use Lemon juice or vinegar, exchange 3g of Gypsum by juice from one lime (about 60ml) or 2 tbsp. of distilled vinegar, diluted in 1/8 cup of hot water. However, do not expect silken tofu out of this coagulant, not possible.

5) GDL – (short for Glucono Delta Lactone) GDL is a naturally-occurring food additive used as a sequestrant, an acidifier, or a curing, pickling, or leavening agent. Pure GDL is usually in form of white odorless crystalline powder. Natural GDL is commonly found in honey, fruit juices, and wine. It is now commonly used in making commercial tofu. GDL is usually used for making silken tofu because it is easier to use, more tolerable when it comes to texture, but not taste. If you add too much GDL, the final result will be firmer but it tastes quite sour, like spoiled milk. GDL also gives a smoother, more jelly like texture, while Gypsum gives a softer, more custard-like texture.

For this recipe, if you wish to use GDL, exchange 3g of Gypsum by 3g or ¾ tsp. of GDL, diluted in 2 tbsp. of water.

The reason I choose Gypsum to make mine tofu is because:

1) It results in the plainest taste tofu, which can easily complement other ingredients in cooking.

2) It can be use to make both silken tofu and normal tofu in the same batch. Hence, more choices for me.

3) I could not get a hand to other coagulants like Nigari or Epsom salt, or GDL. I am a very honest person. I did not have many experiences working with those two, either.

4) The results I made with lemon juice or vinegar is too firm for my taste and the final product yields were much lower than using gypsum. Of course I want to be economic when it comes to cooking.

UPDATED 21/01/2013:I have heard some recent feedback from Sheila of “The not so straight forward life of a dental student” about using epsom salt to make silken tofu. Her experience with it was not satisfying. The problem that she encountered was that “the tofu was like vomit in the bowl“. But I think I kinda know the problem , thanks to many own attempt, and failure of course in the past. To make long story short, this curdling problem happens when the amount of coagulant is too much for the amount of soy milk. And this can be caused by 2 things:

1) Your soymilk is not thick enough. Well, I must say, this is a very vague topic. This really depends on the type of beans you use, the techniques you use to milk and cook them. If this problem happens to you, I suggest that next time, you try to blend the beans more finely, squeeze them a little harder to get all those precious juice out. Or try using a little more beans for the same amount of water, maybe add about 50g more. and finally, just to make sure, cook them a little longer to evaporate more water from the milk, this might yield a little less tofu, but well, it is for the best.

2) The coagulant is too powerful for that amount and thickness of soy milk. This again, is kinda uncertain for amateur for us. As I said above, Epsom or other coagulants (that I have not have the chance to experiments) has quite powerful setting ability comparing togypsum(that I tried), I recommend you to experiment with this matter, by reducing the amount of coagulant little by little, to see how it going. Next time, together with working on your milking techniques to improve the soymilk thickness, how about trying a tsp. (or stated in the recipe) ofcoagulantsminus just a little pinch?

Ah, one more important thing is to make sure your blend the coagulant with the hot soymilk as fast as you can. The process should be done in about 5-7 second.

I know, it is frustrating and time consuming to make tofu, especially silken tofu. And it is event moredisappointingwhen all that hard work did not turn out as well as you expected. But it is alright, we are allenthusiasts who are willing to learn, not pros who has to do it perfectly all the time. In Vietnamese, we have a saying “Trăm hay không bằng tay quen”, meaning “you will definitely get better at things when you try to perfect it again and again”. And I think this isspecificallytrue in cooking and baking. Of course there are ones that are blessed withexceptional taste buds or skillful hands, but we can all get there if we want it and try hard enough.🙂

I wish you all the world’s luck, passion and patience with tofu making. Please do come back and give comment, feedback on the recipe, I am more than willing to help and learn. 😀

——————————————-

Note on Tofu mold

I am now having a 22x11x5cm wooden semi-pro tofu mold to serve my obsession at making the perfect tofu. 😛 Here is a picture of it:

It works perfectly in making tofu from 1 to 2 liter of soymilk in my recipe; final result is about maximum 500g of firm tofu each batch.

Here is some ways to make yourself a tofu mold, aside from buying it if you can:

1) If you, or your fathers, brothers, husbands, boyfriends, (I just assume, no sexism here, LOL) or anyone are good carpenters, you can make it yourself, following this instruction. Build a wooden frame from finished 1.5cm (3/4-inch) thick lumber. The open frame can be square of approximately 15x15cm (6-inches by 6-inches) or rectangular of 22x11cm (8.5-inches by 4.5-inches) and have a height of 5cm (2-inches). Build 2 pressing boards (removable) from the same lumber. The dimensions of the top should be 0.3 cm (1/7-inch), on every side, smaller than the interior dimensions of the frame. Tap 2 lumber sticks across the bottom of the frame to hold the bottom board. The top board has a handle for easily removing when the tofu is done.

2) How to make your own tofu mold using 2 heavy loaf pans:

http://ieatfood.net/2009/05/09/how-to-make-a-heavy-duty-steel-tofu-press/

3) Using 2 heavy-duty plastic boxes of the same size, Drill several small holes at the bottom of one box. (I used to do this all the time before buying the current one)

4) Using a round strainer as the mold. Like in this picture. Of course you will not have a square pieces of tofu out of this kind of improvising mold, but it still make decent tofu.

Whatever technique you choose, just make sure you have a lid, or a board, or a dish that fit inside the pan, strainer, or box dimension, act like the top board of the tofu mold.

——————————————-

Instructions

Again, follow this recipe to make your own fresh soy milk. Then continue with these steps.

Step 1: Save ½ cup of cool soymilk aside for making coagulant. Reheat the rest of your fresh homemade soy milk at medium heat to a boil, again. Stir every 1-minute to prevent burning at the bottom.

Step 2: While the soy milk is being reheated on the stove. Time to make your coagulant mixture. Dilute 2.8g of gypsum (remember the tiny amount mentioned above) in ½ cup of cool soy milk, stir very well to combine.

Step 3: When the soy milk is boiling, turn off the heat, and let it sit on the stove for 5 minutes to cool it down to about 85 degree Celsius. This is important because the Gypsum require high temperature to activate the coagulating power.

Now, pour the coagulant mixture into the other prepared big pot, NOT the soy milk pot. Shake the pot in circular motion to have the coagulant evenly coat the pot side.

Step 4: Now this is a very important step of the tofu making. You have to arrange the coagulant coated pot onto a chair or lower surface than your kitchen counter. Make sure that it stay very sturdy on that surface because we gonna do some serious pouring. 🙂 I use a chair pillow to settle the surface. Look in the series below.

Prepare a heatproof spatula near by the chair where you can easily find and reach. And also, set up this chair-pot system somewhere in the house, near the kitchen, where it can stay very still and unharmed without conflicting with your daily chores for the next 20 minutes.

Step 5: Now that your soymilk is simmering (it is super hot, so be careful! But being able to work FAST with tofu is necessary), with the kitchen mittens on, CAREFULLY get it out of the stove. Now you are standing on the floor, with your body facing the coagulant coated pot. From 40cm above the chair surface, you want to pour the hot soy milk into the pot very fast, and very forcefully. (But again, be careful; don’t let the hot liquid splash on you) It will bubble up quite lots; you are doing the right thing! Get closer to the coagulant pot at the end of the process, like shown in this series. (I made this series in Microsoft Word, can you believe it? LOL)

Now, grasp the spatula, give the soymilk-coagulant coated pot 2 or 3 quick but strong stirs, make sure the spatula reach to the bottom of the pot. The reason for these quick stirs is to make sure the coagulant/gypsum is contributed evenly in the soy milk.

Step 6: Now immediately close the pot lit, lined with a dry clean kitchen towel like shown in the picture.

This is to absorb the steam evaporated from the hot soy milk in order to prevent them from liquidized and drop back into the coagulating tofu mixture, and annoying it. You must remember that the soy-tofu mixture in this pot right now is really, really fragile. Treat it like a thousand-of-euro Swan made by Swarovski crystal. Don’t touch it, don’t move it, don’t do anything risk disturbing the coagulation, and no peaking, please! Patiently waiting for 20 minutes will be fully rewarded. I promised. 🙂

Step 7: While waiting for the silken tofu to set, prepare the tofu mold near the kitchen sink. Make sure that the inner board is in if you are using a wooden mold like me. Line up your mold with prepared cheesecloth.

Step 8: 20 minutes are up! Aren’t you nervous? Excited? Worried? Open up the lid, now please. 🙂 Here is my silken tofu. YAY! We did it!

See how it is beautifully set? WOW! The first time I made this silken tofu to happen, I was so happy, I jumped around the apartment, closed the lid, opened it; touch the tofu, and repeated the whole cheering process all over for like 5 times. DON’T be like me, unless your goal is to make silken tofu only. If you set eyes on the medium/firm tofu block, we have not finished yet!

Tofu curds stick to each other, ONLY when they are still hot, very hot. Therefore, you have to work fast, really fast, to transfer those beauties into the mold for instant pressing.

Step 9: Put the mold into the clean, non-watery sink. Use a spoon with thin edge (I cut of half of a soda can into a scoop form, the edge needs to be sharp and thin, in order to easily cut into the silken tofu without shattering it), to scoop the hot silken tofu out of the pot, into the mold. Work fast!

You can eat this right now, with a dash of soy sauce, or the regular like I usually enjoy, with ginger brown sugar syrup (recipe after the instruction). Eating this silken tofu is like tasting cloud in your mouth, literally. It is so smooth, so soft, and so fragile that it just flows into your throat like a wave of air. 🙂

Scoop it out into the tofu mold, like this.

Step 10: After scooping all the silken tofu into the mold, you want to use a knife to run some line across these curds or grasp 4 corners of the cheesecloth, lift it up and shake it a little, in order to give ways to the pitiful soy whey (the yellowish water that splits away from the curds when they are broken) that trapped in the layers of curds; in order to achieve a baby-butt smooth, non-holey texture in your final tofu.

Step 11: Now cover the surface of the curd with the cheesecloth, like this. Do this very neatly! We don’t want an uneven or rocky tofu block, do we? And again, work as fast as you can to keep the curds very hot.

Step 12: Put the top board on. Press down very hard, but use even forces among every corner of the top board, to get as much soy whey out as you can. This is also to make sure that the curds are well introduced to each other.

Step 13: Use heavy objects like books, or rocks to make the pressing system for the tofu. I used my enormous wine bottle, like this. You want heavy objects, about 7 to 10kg in total. Make sure that the system can stand on its own in the kitchen sink, and distribute an even and heavy pressure on the top board.

Step 14: Now all you have to do is wait. Yes, I know, it is frustrating, isn’t it? Keep up with me, OK? The heavy pressure applied on the top board will stick the curds together, and squeeze water out of the tofu curd to make them firmer. You have total control on how you want your tofu to come out.

• Soft tofu for miso soup: wait 25 minutes.
• Medium tofu for frying: wait 30 minutes.
• Firm tofu for salad: wait 35 minutes.

It is the timer in my kitchen, due to the weight of my wine containing bottle. If you have lighter objects (no less than 6kg), you might want to wait about 5 minutes longer. If you have heavier objects, you can proceed with the next step about 3 minutes sooner. Check by peeling out the cheesecloth and press, if the tofu is sticking to the cloth, it is not done.

Step 15: After the desired waiting time, you are now granted to open the cheesecloth surface. YAY! Here is my tofu, still in the mold, though. Make cuts in the tofu to the smaller desired size, because it would be risky to get a full size tofu block out of the mold. I cut mine into 4 rectangles.

Now what you want to do is to get the mold out of the sink, fill the sink with very cold water. Flip the tofu out of the mold.

Now carefully peel the cloth out of our tofu.

Today I want to make medium tofu. But I got hooked up with a new, very interesting TV series (Shameless – US edition, you might know?) So I kind of went a bit overboard with the time, 33 minutes to be exact, so my tofu is a bit to the firm side, but no biggies, still great for us. 🙂 There you go, homemade tofu! La la la!

Mine weighed at 569g of firm tofu. It is almost triple the amount of soybean you used, right? 🙂 Break my record, again. Last time I did this; 325g firm tofu out of 150g soybeans. YAY! Here is a picture of one time I made both soft and firm tofu. Look at their size and see the differences. Can you believe they are made from the same amount of soybeans? 🙂

——————————————-

Traditional Chinese Tau Fu Fa or Vietnamese Tàu Hũ

Silken Tofu Dessert in Ginger syrup

Ginger syrup

• 1/4 cup raw brown sugar
• 2 pandan leaves, cleaned and knotted (optional, this is how we did originally in Vietnam, but I cannot find this ingredient here in Finland, also)
• Thumb-size ginger piece, peeled, sliced at 0.5cm wide, and smashed with the side of a knife
• 1/3 cup water (Stir to dissolve with the sugar, taste, and then add more to your taste)

Bring everything to boil in a saucepan.

When the sugar is melted, let the sauce simmer for 5 more minutes.

Remove from heat and cover to let the pandan leaves and ginger infuse the sugar syrup, for 20 minutes. (Hehe, have you noticed the reflection on the ladle of me holding the camera? LOL)

Coconut Milk sauce (Vietnamese Style)

• 100ml coconut milk
• 1 tsp. corn starch
• 1 tbsp. water

Boil coconut milk in a sauce pan. Dissolve cornstarch in water, pour into the boiling coconut milk while constantly stirring until thicken, custard-like. Let cool.

How to serve

Use a thin-edged spoon to scoop the freshly made, hot silken tofu as thin layers out in the serving bowls.Here I want to show you the texture of my silken tofu. 🙂

Gently pour the warm ginger sauce over the tofu, follow by a spoonful or two of coconut thicken sauce for a Vietnamese flavor.

And Enjoy!

——————————————-

BONUS 1 – Making Silken tofu Dessert by Gelatin or Agar-agar Powder

(Thanks to RotinRice and Quinn’s Baking Diary)

I normally don’t do bonuses. But yeah, I have been totally ignoring you, my dear readers, and this blog for the past 3 days, and it is weekend. I feel very sorry. So let me make it up to you, OK? 😉

You want a sure-fire silken tofu dessert? You just want to enjoy it chilled? You don’t want to mess tofu up with those tricky coagulants? So here it is, a chilled silken tofu dessert recipe. No complicated cooking or gypsum needed! YAY!

Ingredients

• 300ml soy milk (Store-bought and fresh homemade is both OK)
• 1 tsp. gelatin powder or ½ tsp. agar-agar powder

Instructions

With Gelatin – Dissolve the gelatin powder by sprinkling it over 1 tbsp. of water. Set it aside to spring for 5 minutes. Place the soy milk in a pot/ or microwave and reheat gently. When it is about hot to touch, take it off the heat source and pour in the gelatin paste. Whisk it to dissolve for a minute, make sure the gelatin melted and contributed well in the liquid.

With Agar Powder – Divide soy milk into two portions (100-200ml). Pour one portion 200ml into a saucepan and heat it up over low heat, stir to prevent burning. Dissolve agar-agar powder in 100ml portion and mix well. When soymilk in the saucepan turns slightly hot, gently pour in the soy milk and agar-agar mixture into the saucepan, stir to mix well. Stir from time to time, cook for about 5 minutes over low heat with constant stirring. Turn off heat when you see bubbles on top but not wait until it boil.

Pour the hot soy milk mixture into a large bowl, containers or ramekins. Skim off the bubbles on top. Cool it down to room temperature, skim off a thin layer of tofu curd on top, if there is and chill it overnight in the fridge, cover tightly with a plastic cling wrap.

Next morning, scoop it out in serving bowls as thin layers, serve with chilled until very cold Ginger syrup (and coconut thicken sauce, if you prefer Vietnamese style). Remember, DO NOT serve with hot syrup, or the silken tofu will melt.

——————————————-

BONUS 2 – Silken egg tofu

Thanks to Table for 2 and more

Another bribe for my faithful readers who keep up with my usual long post till now. J Here is another easy, no hassle silken tofu recipe! Wonderful for savory dishes, no gypsum needed, just eggs and you are good to go. You might know this little tube here, it is egg tofu package sold commercially.

Ingredients

• 500ml Soya Milk (Store-bought is fine)
• 6 eggs
• 1/4 tsp. salt
• 1 tsp. of corn flour mixed with 1 tbsp. water

Instructions

Mix eggs and soy milk and corn flour mixture evenly. Mix in salt and sieve to remove any bubbles and egg white strings. Pour mixture into a pan or a heatproof container that can fit in one of your big cooking pots. Cover the container with plastic wrap or lid. It is best if you have a glass, or ramekin, or heatproof silicon pans. Metal pan will heat up very quickly, which leads to high chance of curdle up your egg tofu.

Bring water in steamer to boil and then switch to low heat and place the pan/container with mixture in. Steam for 15 – 20 minutes. Remember, at low heat!

Set aside to cool and keep in refrigerator overnight. Remove and cut desired size pieces. Now, eat it, fry it, enjoy!

Egg tofu has a milder, less beany flavor than normal tofu. Its texture is silky-smooth and slightly reminiscent of eggs. Because of its delicate texture, cooking egg tofu must be done with a light hand. 🙂

——————————————-

Now to conclude this never-seem-to-end post, I just want to add one more thing: how to store your homemade tofu. Once your final product is done, keep it the unopened tub in the refrigerator until ready to use, it will be OK for about 2 days. There is a better alternative: to store it in a sealed glass or plastic container under a few inches of water and some pinches of salt. It will last for about 5 days with daily change the water in the container.

Trust me when I say that you’d better consuming homemade tofu very soon after it is made. If you don’t, well, let’s just say it’s probably one of the worst-smelling items you’ll ever pull out of your refrigerator. 😉

Freezing tofu is also an option and only thaws the needed amount for each use. Some fork intentionally freeze tofu because once it’s thawed, it has a more porous texture, resemble to texture of a fish or chicken fillet.

Here are more tips I found very interesting.

————————————————

OK, I should stop now. 🙂 Brain gets frozen again, LOL.

If you have any questions, comments or recommendations concerning this matter, please feel very free to contribute. I would really appreciate that and try to respond to my furthest knowledge limit. 🙂

Have a very nice weekend, everyone.

Rose,